E8 Power Switch Replacement Instructions - SNR-7.5.1-W-024
Purpose This work instruction describes how to replace a power switch for all versions of the E8 centrifuge. Required Equipment * Switch; power input; round body; illuminated red (Part # 100099) * #1 Philips Screwdriver Summary of Process The procedure involves unplugging the unit, removing the rotor and ba…
MXU Power Switch Repair Instruction - SNR-7.5.1-W-009
Purpose This work instruction describes the process for replacing the power switch (100413) on a revision C MXU Digital Centrifuge. Required Equipment * Power Switch (Part # 100413) * Phillips Head Screwdriver Summary of Process The repair procedure involves removing the rotor and tube shields, inverting the …
CytoPrep Power Switch - SNR-7.5.1-W-038
Purpose This work instruction describes the process of replacing the Power Switch for both the CytoPrep-5 and CytoPrep-10 models. Required Equipment * Power Switch (Part # 100099) Summary of Process This document provides instructions for replacing the power switch on both the CytoPrep-5 and CytoPrep-10 units.…
Slide Warmer Power Switch - SNR-7.5.1-W-048
Purpose This work instruction describes the process of replacing the Power Switch (100099) on the Slide Warmer. Required Equipment * Power Switch (Part # 100099) Summary of Process This document provides instructions for replacing the power switch on a Slide Warmer. The attached document contains the detailed …
Ready Warm Power Switch - SNR-7.5.1-W-047
Purpose This work instruction describes how to replace the power switch for the Ready Warm Tissue Bath. These instructions are valid for revision 6. Required Equipment * Power Switch (Part # 100099) * 2mm Hex Wrench Summary of Process The repair procedure involves unplugging the unit, removing the screws, rep…
